产品中心
Inicio > Centro de productos > Tarpaulin > PE Tarpaulin Sheet, Custom Width and Length

PE Tarpaulin Sheet, Custom Width and Length

PE Tarpaulin Sheet, Custom Width and Length

    PE Tarpaulin Sheet, Custom Width and Length

    PE Tarpaulin Sheet, Made to Your Width and LengthA plain PE tarpaulin is the sheet you reach for when something has to stay dry today. It is a transparent polyethylene film, cut as a rectangle and finished with a stitched webbing hem so the edge does not tear out at the first gust. Width and length are both made to order, which means one sheet covers the load instead of two overlapping ones.What the Sheet Looks LikeTransparent film that lets light throughThe film is clear, not white: you can see the shape and colour of the load through it, which makes a covered stack easy to check without unwr...
  • compartir:
  • Contáctanos Consulta en línea

PE tarpaulin Sheet, Made to Your Width and Length

A plain PE tarpaulin is the sheet you reach for when something has to stay dry today. It is a transparent polyethylene film, cut as a rectangle and finished with a stitched webbing hem so the edge does not tear out at the first gust. Width and length are both made to order, which means one sheet covers the load instead of two overlapping ones.

What the Sheet Looks Like

Transparent film that lets light through

The film is clear, not white: you can see the shape and colour of the load through it, which makes a covered stack easy to check without unwrapping it. Daylight passes through almost unchanged. Water beads on the smooth surface and runs off rather than soaking in, which keeps the sheet light and keeps the cargo underneath dry.

Black webbing hem with six rows of orange stitching

All four edges are bound with black woven webbing tape and stitched with six parallel rows of orange thread. The webbing carries the tension along the edge, so the film itself is not the part taking the load.

Black triangular corner patches and galvanised eyelets

Each corner is reinforced with a black triangular patch, and galvanised eyelets are punched through the hem at roughly one-metre intervals so rope or bungee can be tied down anywhere along the edge.

PE tarpaulin corner with black webbing hem, six rows of orange stitching, triangular patch and galvanised eyelet
Detail: black webbing hem with six rows of orange stitching, corner patch and galvanised eyelet.

Specifications

MaterialPE (polyethylene) film, transparent
SurfaceSmooth film, no scrim
ShapeRectangular sheet (four sides)
SizeMade to your width and length
HemBlack webbing tape, six rows of orange stitching
CornersBlack triangular reinforcement patch
EyeletsGalvanised steel, approx. 1 m spacing
WaterWaterproof, water beads off the surface

Typical Uses

Truck and trailer covers

A rectangular sheet with eyelets down both long edges is the standard flatbed cover: rope through the eyelets, tensioned to the side rails, film stretched flat so it does not flap at speed.

Pallet and material stacks

For stacks stored in a yard, a sheet slightly wider than the pallet lets the hem hang past the edges so rain runs clear of the goods instead of wicking back underneath.

Wood, feed and equipment

Firewood, feed bags and idle machinery all take the same treatment: a sheet over the top, tied down through the eyelets, lifted off to ventilate on a dry day.

PE tarpaulins covering pallet stacks and a flatbed truck at a logistics yard
In use: PE tarpaulins tied down over pallet loads and a flatbed truck.

Common Questions

Can I order a PE tarpaulin in a custom size?

Yes. Both the width and the length are made to your measurement, so the sheet matches your load rather than your load having to fit a stock size.

What size tarpaulin do I need for a load?

Measure the length and width of the load, then add the drop on each side — the amount that hangs down over the edges. Send those figures and we will confirm the cut size.

Is a transparent PE tarpaulin waterproof on both sides?

Yes, the film is waterproof on both faces. Water runs off the smooth surface; the sheet does not absorb it or get heavy.

How far apart are the eyelets?

Galvanised steel eyelets are set at approximately one-metre intervals along the hemmed edges. If your tie-down layout needs a different interval, tell us the spacing when you enquire and we will confirm what can be done.

Request a Quotation

Send the width, the length, the quantity and your destination port. We will confirm the price and the production schedule, and can send a sample of the film, the webbing hem and the eyelet before a bulk order.

MENSAJE EN LíNEA

Por favor, introduzca una dirección de correo electrónico válida
Código de verificación No puede estar vacío

PRODUCTOS RELACIONADOS

Binzhou · Shandong · China

Binzhou Taituo Import and Export Co., Ltd

Contact Us

Add: Binzhou, Shandong, China
Tel: +86 19954368176
E-mail: 961336486@qq.com

Copyright © 2026 Binzhou Taituo Import and Export Co., Ltd.

Mapa del sitio
chat

×

Este sitio web utiliza cookies para garantizar que obtenga la mejor experiencia en nuestro sitio web.

Aceptar rechazar